The BMW has incorporated a service indicator light as a maintenance schedule reminder for many years. It's the best kept secret of BMW to have this light reset by the dealership only in order to maintain customer loyalty on routine oil changes and other simple maintenance procedures.

If you prefer to perform your own oil changes, you can reset the indicator light yourself. Depending on what series model you have, the procedure might alter slightly and for older and vintage BMWs, there's a tool required. Hold down on the odometer reset button with your left hand. While continuing to hold it down, place the keys into the ignition and turn once to the accessory position.

Continue holding the odometer reset button until the indicator light starts to flash and after a few seconds the word "Reset" will display. Release the odometer reset button again and five green LED lights will illuminate indicating the system has been reset. This article was written by the It Still Works team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information.

To submit your questions or ideas, or to simply learn more about It Still Works, contact us. Step 1 Sit inside the BMW, close the door and buckle the seat belt.

Step 2 Hold down on the odometer reset button with your left hand. Step 3 Continue holding the odometer reset button until the indicator light starts to flash and after a few seconds the word "Reset" will display. Step 4 Release the odometer reset button. Then press and hold it once again. About the Author This article was written by the It Still Works team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information.Your shopping basket is empty.

BMW E46 car warning lights, car warning symbols such as engine management light, ABS light, airbag light this guide will help you. We have created this BMW E46 dashboard lights meaning guide and will show you how to deal with an engine light, airbag warning light, ABS light and all of the other car warning signs on your dashboard.

bmw e46 transmission warning light reset

Because this light has been illuminated on your dashboard, your vehicle will have stored a code which you need to retreive in order to fix the problem, or find the source of the problem. The i will read manufacturer specific fault codes and generic fault codes, exactly like they will do in the official BMW workshops. The fault could be relating to a faulty part such as O2 sensor, igniton coil.

If this light is lit up it means there is a problem in the airbag SRS system supplimental restraint system and you need to get this checked out. The good news is that it can be done cheaply. It could be that an ABS sensor needs to be replaced immediately. If you do need to replace a sensor - please visit www. Look further down this page to see the other dash lights which show up when you need to replace an ABS sensor. BMW E46 3 Series brake warning light - this brake symbol will illuminate if the handbrake is applied or in the ON position.

See the ABS section on this page for more info. Warning that the traction control has been turned off and is no longer active. This warning symbol can flash if driving over road conditions like ice or snow. BMW E46 3 Series brake pad wear - brakepads are worn and need to be replaced as soon as possible. If you have replaced your brake pads and the dash light is still illuminated, you will need to visit www. BMW E46 3 Series cooling system or coolant light - stop when safe, check and top up coolant as needed.

Check also for coolant leaks under the engine because a cracked or split e46 expansion tank is quite common. In this case the cooling system needs to be drained and a new tank installed which is generally a DIY job if you feel confident. If you have added oil and the light remaims, or the light stays on for an extened period of time after start up, you will need to replace the oil level sensor which can be found by visiting www.

BMW E46 3 Series battery charge is low. Do not drive for long distances and have it checked by a professional immediately. It could be a battery which needs to be replaced, or it could be another issue like a faulty alternator. It will also give you information on the initial problem and then turn off the warning lights. E46 Fuel Gauge 2. E46 Flashing turn indicators 3.

Stereo preamp

E46 speedometer 4. E46 Coolant thermometer 7. E46 Selector level position for automatic vehicles E46 Display for trip meter, distance recorder, clock, service interval, on board computer, mpg etc E46 Check contol E46 Trip distance control zeroing Here we have a video of all of the E46 dash warning lights all on at the same time - quite a cool trick If you see the following light appear on your BMW, the chances are you need to replace an ABS sensor.

Code Readers. Best Car Scan Tools For Remember Me? Results 1 to 8 of 8. Thread: Transmission warning light Tweet. HiI've a trobule with my 99" E46 ci I found that everytime when the warning light on MUST with these 2 situation : - stopped the car by brake for example: stop red traffic lamp, traffic jam.

TRANSMISSION FUSE LOCATION REPLACEMENT BMW E46 - TCM FUSE BMW E46

I have checked the battery and alternator, it seems normal, thus the garage help me to change Transmission fluid as adviced, but it still the same. Few months later, I found an expert in BMW garage to help, the engineer use "GT1" to monitor the system and had a road test, he said my tranny too hot compare with engine, when tranny reach C, warning light on, thus he ask me to replaced whole cooling system water tank, water pump, heat exchanger, radiator, water pipes Become an Inner Circle member to remove these ads.

Hi, did you ever get this resolved. I have a very simliar problem and just replaced the battery. It happened 1 more time after that, so I did a little more research. My reserach led me turning the car on and off 6 times. It's been a day now since i cycled the power 6 times and it hasn't returned - but too soon to tell.

How to Clear BMW CC-ID Codes Fault and Warning Messages

I have the same issue. My indie mechanic doesn't know what it is but he suspects something is causing an irregular voltage which trigers the warning light. Battery, alternator are all fine. No aftermarket other than angel eyes which I've had for 4 years and never had this issue before. Car does not go into limp mode amd gears shift fine but!

This started right before water pump died out but this was replaced and the indicator still comes on. Originally Posted by Unregistered. I have had the above problems too, and it's linked to the aircon. I was of the opinion that when the aircon compressor was activated and engine revs increase accordingly this may cause the transmission to think it's slipping, suffering voltage drop or a transmission ecu fault.

Either way it's related to the engine revving by itself and the computer thinking it's faulty. I have tried very scenario on the auto trans sport mode, manual, park every gear the only position it will not cause fault is when you stop at lights etc, put into neutral N.

It does not go into fault mode,strange. I've tried my peake computer tester on car but no faults come up. I think you have to go to a mechanic to get tranny computer tested. I have had allot done to car just recently, i will list a few that other people said may have contributed to the problem.This page is for personal, non-commercial use.

Modern automatic transmissions are full of sensors so that the computer can easily and accurately monitor things like fluid temperature, fluid level, and the overall pressure inside the transmission.

Automatic transmissions are very expensive to replace so it is worth the effort to keep it well maintained. If the computer detects any abnormal readings from the sensors, a code will be stored and the automatic transmission indicator light will turn on to alert the driver of possible issues. Malfunctioning sensors will also give false readings causing the light to come on so always have the sensors tested again. One of the most common issues that causes this indicator light to illuminate is that the transmission fluid temperature is higher than normal.

If this light comes on, it should be checked out as soon as possible. As mentioned earlier, automatic transmissions are very expensive to replace and they can sometimes be salvaged if you act quickly and get the necessary repairs done. While the car may not drive differently with the light on, you should have the it checked out as soon as possible before any excessive damage occurs. Driving with this indicator light on for long periods of time is likely to cause a lot of wear to the transmission and reducing its lifespan significantly.

If your automatic transmission light stays on, our certified technicians are always available to assist you in identifying any issues. This article originally appeared on YourMechanic. Autoblog is partnering with YourMechanic to bring many of the repair and maintenance services you need right to you. Get service at your home or office 7 days a week with fair and transparent pricing.

How to Reset a BMW Service Indicator

We get it. Ads can be annoying. But ads are also how we keep the garage doors open and the lights on here at Autoblog - and keep our stories free for you and for everyone. And free is good, right? If you'd be so kind as to whitelist our site, we promise to keep bringing you great content. Thanks for that. And thanks for reading Autoblog.

bmw e46 transmission warning light reset

You still haven't turned off your adblocker or whitelisted our site. It only takes a few seconds.

bmw e46 transmission warning light reset

Share 0 Comments. What the automatic transmission light means If the computer detects any abnormal readings from the sensors, a code will be stored and the automatic transmission indicator light will turn on to alert the driver of possible issues. What to do when the automatic transmission light is on If this light comes on, it should be checked out as soon as possible. Is it safe to drive with the automatic transmission light on?

Ownership warning lights automatic transmission. Sign in to post. X Sign in to post Please sign in to leave a comment. View More.

Thank You Thanks for subscribing. Check your in-box to get started. Sign Up More Info. We notice you're using an ad blocker.

Please consider whitelisting Autoblog.Just like what Matthew said, you are driving one of the models that could potentially have some serious defects on BMW's GM-sourced auto transmission. If it fails on you, you can either look into replacing it with a rebuilt transmission from BMW or possibly look for a manual transmission conversion.

If you want to look into a manual transmission conversion, www. They basically pull used MTs from wrecked cars and installs them for you. I believe that this car requires a very special transmission oil. Very expensive. Some of these cars do not have a transmission oil dip stick to measure how much transmission fluid is in the car.

bmw e46 transmission warning light reset

There is a very involved process on how to refill the transmissions with no dipstick. If you have a trans. Allow the oil to drip down for at least 15 minutes of off time before checking. Do not overfill. BMW used to have a policy of changing the transmission fluid only at themile markers. Sounds like your fluid is low, or one of the fluid lines are clogged up.

Elevate sylmar

Get your fluid flushed right away and see if that helps. It seems like you would have to have pretty good miles on the car for that to happen, as the trans fluid generally lastmiles.

I used to own a i too. I loved that car. But one day, while backing out of a restaurant, the tranny quit working in reverse, and I had to replace the entire thing. I hope you don't have the same problem, but I would get that thing looked at quick. One other thing, the 's have two different kinds of automatic transmissions. In the later part of the year, they had the steptronics, like mine was, but in the earlier part of the year was one that didn't allow you to shift gears manually.

If you have the earlier one, then you are going to be in better shape I think, as they were more dependable.

But the steptronic in still had kinks. By the way, my tranny went out withmiles on it. Other areas to watch out for: window regulators can go out, cooling systems problems are common for that car too, like the thermostat needing replacement, and also those little orange pixels on the dash tend to burn out.

Hope that helps. I have a B. W xi, have you checked the transmittion fluid? If the fluid is ok, then I would take it to the dealership. It could be a sensor. W web site sometimes it can help. Answer Save. Snowie Lv 6. The transmission oil could just be the tip of an iceberg.

There're tons of complaints online. Best of luck! Phillip S Lv 6. Mathew F. Source s : I've worked here for over three years www.Each BMW E46 is equipped with an internal computer that monitors a variety of aspects of the engine system. When the computer detects a potential problem concerning the vehicle's emission and exhaust system, the exhaust emission valve warning light will be illuminated on the instrument cluster.

After the problem causing the light to come on has been resolved, the light will automatically turn off in many cases. Otherwise, it can be manually reset using a BMW diagnostic scanning tool. Twist off the cap of the diagnostic port, located in the engine compartment below the windshield on the passenger's side.

More Articles

Turn the ignition switch on. Press the power button on the diagnostic tool if it does not come on automatically. Wait for the tool to finish scanning the computer for trouble codes. Turn the ignition switch off.

Hercai with english subtitles

Disconnect the diagnostic tool. Replace the cap covering the diagnostic port. David Clair began writing for websites increating online marketing content for business owners. He has written for Internet companies including eBay and creates training materials for an online education company. Clair is studying technical writing and pursuing an Associate of Arts in information technology from the University of Phoenix.

Written by: David Clair Written on: May 13, Tips If the situation that caused the warning light to come on has not been resolved, it may come back on after resetting.

Wipro designation hierarchy structure

About the Author.It keeps track of all routine maintenance and servicing requirements of your BMW. When this light illuminates, you should have your BMW serviced before attempting to manually reset the light. The best way to reset it is to use a computerized scan tool obtained from your local auto parts retailer. This tool can be purchased or borrowed for free from most auto parts stores. Put the key into the ignition and turn the vehicle to the "on" position but don't start the engine.

Find the diagnostic port under the driver's side dashboard near the pedals. Plug the computerized scan tool into this port. The battery from the vehicle will automatically power on the tool. Find arrows on the faceplate of the scan tool and use them to scroll through the menu until you find the "Read All Codes" command. Select this command. Scroll through the menu again and find "Clear All Codes. Turn off the vehicle and wait five minutes.

Start the engine and verify that the check engine light is still off. This article was written by the It Still Works team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information.

To submit your questions or ideas, or to simply learn more about It Still Works, contact us. Step 1 Put the key into the ignition and turn the vehicle to the "on" position but don't start the engine. Step 2 Find the diagnostic port under the driver's side dashboard near the pedals. Step 3 Find arrows on the faceplate of the scan tool and use them to scroll through the menu until you find the "Read All Codes" command. Step 4 Scroll through the menu again and find "Clear All Codes.

Items you will need Computerized scan tool Ignition key. About the Author This article was written by the It Still Works team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. Photo Credits le tableau de bord image by richard villalon from Fotolia.